Thursday, March 12, 2009

How To Read a Motorcycle Tire

By American Motorcyclist staff
American Motorcyclist Association
www.americanmotorcyclist.com



It's a rotten feeling. You look down at your tire, and there's no denying that those nice deep grooves have become a shadow of their former selves. It's a goner, and it's getting worse with every mile.

As you look around your local motorcycle shop for a new tire, you see all sorts of letters and words on the sidewalls. Would you believe just about everything you need to know about a tire, including when it was made, is contained there?

It's really not that difficult to decipher the black art of tire designations, and knowing what you've got makes you a well-educated consumer-which is never a bad thing.


Tire size

As you look around your local motorcycle shop for a new tire, you see all sorts of letters and words on the sidewalls. Would you believe just about everything you need to know about a tire, including when it was made, is contained there?

It's really not that difficult to decipher the black art of tire designations, and knowing what you've got makes you a well-educated consumer-which is never a bad thing.

Tire size

First off, there's those big numbers and letters that may read something like 130/90 16, or MT90 16. These numbers indicate the size of the tire, and the rim it's designed to go on. In this case, these are both the same size tires.

How can we tell?


Let's start with the first series of numbers, 130/90 16, otherwise known as the metric designation. This is the most popular nomenclature today and it's practically a standard in the automotive world.


The 130 designates the tire's width in millimeters, measured in a straight line through the tire from one edge of the tire's tread to the other. The second number, 90, is a bit trickier to understand. This represents the aspect ratio between the tire's width and its height, or how tall a tire is in relationship to its width. Simply put, the higher this number is, the taller the tire will be. In this case, the tire is 90 percent as tall as its width, or 117mm.

The last number, 16, is the tire's rim diameter expressed in inches.

The width on some tires may be expressed in inches as well, but usually the aspect ratio is left off.

The other series of numbers and letters, MT90 16, represents the same tire size, but it's expressed in an alphabetical code. M means the tire is designated for motorcycle use, T is the tire width code, 90 is the aspect ratio and 16 is the rim diameter.

Size conversion chart

Front tires Rear tires
Metric Alphanumeric Metric Alphanumeric
80/90 MH90 110/90 MN90
90/90 MJ90 120/80 MP85
100/90 MM90 120/90 MP85
110/90 MN90 130/90 MT90
120/90 MR90 140/90 MU90
130/90 MT90 150/80 MV85


150/90 MV85

The alpha numeric system is the older method for tire sizing. And in the old days, tires just didn't get much bigger than an MV85, which corresponds to a 150mm width. Therefore, newer tires larger than 150mm will only carry the metric sizing designation

Speed and construction

Interspersed with these sizing numbers, you're likely to find other letters that'll appear as such: 160/70VR 16, 170/60R 16V, or in other combinations. These two extra letters indicate speed rating and tire construction.

Each letter in the speed rating notes the maximum speed a tire can sustain under its recommended load capacity. For instance, V is equivalent to a maximum speed of 149 mph. Because this rating system was created in Europe, the increments per letter are in 10 kilometers per hour.

Rating Speed miles
per hour
Speed kilometers
per hour
Q 99 mph 160 km/h
S 112 mph 180 km/h
T 118 mph 190 km/h
U 124 mph 200 km/h
H 130 mph 210 km/h
V 149 mph 240 km/h
W 168 mph 270 km/h
Y 186 mph 300 km/h
Z Over 149 mph Over 240
km/h

The next letter, R, indicates the construction used within the tire's casing. R stands for radial construction and B means belted bias.

Wednesday, March 4, 2009

ATV Tire

Many people get very upset when they spend thousands of dollars on a new or used ATV but discover that it does not drive the way they expected it to. The problem may not be your ATV or your driving skills. The problem may be that you need is a new set of ATV tires.

It is important to remember that the ATV tires should be replaced when the nub elements begin to round on the edges. New ATV tires will give you the extra assurance that you will need to make it through a sharp curve or up a steep hill.

In order to develop a better understanding of the features, benefits, sizes, and specifications to look for in ATV tires, you may want to do some internet research. There are many different ATV tires that are available. You need to determine which ATV tires meet your needs. Are you only driving your ATV on paved tracks? Or are you driving through very rough terrain and need the extra gripping action that some ATV tires have?

ITP INTRODUCES A WIDE VARIETY OF ALL-NEW TIRES & WHEELS FOR 2009!
It's going to be a big year for ITP, the world leader in ATV/UTV aftermarket tires and wheels. All-new for 2009 are the BajaCross, UltraCross, TundraCross and Holeshot SxS tires, as well as the System Six and SS312 wheels. ITP has also made numerous important updates to existing product lines, including the introduction of the 15-inch SS212 wheel. You'll find the whole story within these pages, or contact your favorite local dealer today!